Crazy BMW Special

Prices Are Valid Until 30 April 2019 And / Or While Stock Last!!!

 Kindly Contact Us On 083 401 7383 / 076 615 4285

Crazy BMW Special Opt 2

Prices Are Valid Until 30 April 2019 And / Or While Stock 

Last!!! 

 Kindly Contact Us On 083 401 7383 / 076 615 4285

Crazy BMW Special Opt 1

Prices Are Valid Until 30 April 2019 And / Or While Stock Last!!!

Kindly Contact Us On 083 401 7383 / 076 615 4285

Crazy BMW Special

Prices Are Valid Until 30 April 2019 And / Or While Stock Last!!!

Kindly contact us on 083 401 7383 / 076 615 4285

What Went Down On The BMW ISTA Weekend.

The Training Seminar Was A Success!!!

We will keep y'all posted for more training semin ars on the pipeline...

Delayed NTON-NTON

BossLady Rockin' Up after the BMW ISTA Training Seminar

Caught in the moment...moment of glory...moment of victory... #BossLady4Life

Odometer, ECU Clone & Key Programmer all in one OBDSTAR

OBDSTAR X300 PAD2 X300 DP Plus C Package Full Version

This device is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through vehicle diagnostic OBD connector and variant mobile

intelligent terminals, it achieves vehicle trouble diagnosis for full car model and full system vehicle.

Meanwhile, taking advantage of mobile internet, this device integrates more application and service, such as Maintenance Database, remote assistant, One Key Upgrade etc.

OBDSTAR X300 PAD2 X300 DP Plus C Package Full Version:

Immobilizer + Mileage correction + Diagnosis + Special function (Oil rest + ABS + Battery matching + ECU programming + EPB +Throttle programming + Airbag rest + TPMS + Steering angle rest+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning + EEPROM + Key renewing + ECU cloning ) Adapter (P001 programmer + C001 circuit board + C002 circuit board + W001 data cable + W002 data cable + W003 data cable + Toyota smart key Emulator) + others (Ignition coil + Remote tester)

OBDSTAR X300 DP Plus Functions:

 Reading DTCs

 Clear DTCs

 Read data stream etc.

 Immobilizer system (Including Toyota Smart Key)

 Cluster calibrate

 OBDII

 EEPROM Adapter

 ABS

 Battery Matching

 CVT learning

 EPB

 Gear learnig

 TPMS(low tire) reset

 ECU programming

 Steering angle reset etc.

Kindly contact 076 615 4285

FOR VW & Audi

VAG CAN PRO support CAN BUS + UDS + K-Line for diagnostics and programming of electronic components used in vehicles for Volkswagen, for Audi, for Seat, for Skoda, made from 1990 ---> present.

For more information contact us on 083 401 7383 / 076 615 4285

Toyota Techstream Diagnostic Set For Sale

• MINI VCI Support for Toyota TIS OEM diagnostic software

MINI VCI For TIS Techstream supports TIS OEM diagnostic software and all the diagnostic communication protocols needed for(since 1996).

Mini VCI is a high performance diagnostics and reprogramming interface, compatible wit SAEJ2534 (Pass-Thru), provide high speed communication to most of vehicles.

Connect to PC with high speed USB 2.0. Mini VCI can be used with major car factory online diagnostic and ECU reprogramming applications, and support a rich third-party applications.

For more information, kindly contact us on 083 401 7383 / 076 615 4285

XTOOL A80 H6 For Sale.

For Only R18 500.00 this Easter Season, get an XTool at Car Diagnostic Tools.

Review 

1. Ability to quickly Read and Clear codes in ALL modules for European, Asian, and Domestic vehicles 1996-present

2. One button Auto-Scan reads codes in ALL modules and displays them on the screen

3. Quick Erase feature allows all codes to be cleared with the push of a button

4. Live data graphing for the ECU

5. One tool to do it all. Reads and clears trouble codes on engine, transmission , airbag, and ABS failures

6. Global OBD II coverage (US, Asian, & European)

7. Turns off engine, transmission, ABS, and airbag warning lights for most USA Domestic, Asian, and European vehicles

8. Supports all 10 test modes of the latest J1979 OBD II test specs, including Read Codes,Erase codes, Live Data, Freeze Frame, I/M Readiness, O2 Monitor Test, On-Board Monitor Test, Component Test, and Vehicle Information

9. Enhanced OBD II Mode 6

10. OBD II code tips guide technicians to the root cause of trouble codes faster

11. Data graphing

12. View freeze frame data.

Special Functions

* Key programming

* All System Diagnostic

* EEPROM Adapter

* Odometer Adjustment 

* Electric Parking Brake

* Steering angle sensor adjustment

* DPF 

* Service/Maintenance Light

* Cylinder

* Air Suspension

* PIN Code Reading 

* Headlight

* Tyre Pressure Reset

* Throttle Relearn

* Support the latest vehicles with CAN BUS and UDS protocol

For more information contact us on 083 401 7383 / 076 615 4285

Automobile Brake Fluid Tester

A Key to detect Brake Oil moisture content.

Tire Pressure Lamp Light?

Specification

1. Check the car brake oil quality.

2.5 LED lights display the percentage of moisture content in brake fluid.

3. Auto power off.

4.1 LR03 AAA batteries (not included).

 

Instructions:

Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance. Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but soon replaced.

 

1. The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified

2. The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later

3. The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced

Red LED: change brake fluid

4. LED red flashing: battery replacement

5. LED yellow: low moisture content, check again in six months

6. LED green: brake fluid lines / cell row

 

Features:

Five LED indicators show the test results more accurate.

Testing DOT3,DOT4,DOT5 brake fluid.

Press the switch to turn on the power, the green LED light that represents the battery.properly,the green light does not shine on behalf To replace the battery

Automatic shutdown.

 

Technical parameters:

Green: Battery OK, that is, brake fluid does not contain water

Green/yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.

Green/yellow/yellow: brake oil in water content of about 2%, brake fluid can continue to use.

Green/yellow/yellow/red: brake oil in water content of about 3%, the proposed replacement of brake fluid.

Green/yellow/yellow/red /red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.

For more contact us on 083 401 7383 / 076 615 4285

BMW & Mini ISTA Training Seminar

All aspects of Coding / Programming according to your existent factory options, at Car Diagnostic Tools... 

Reserve your seat for this Seminar now... 

Space is limited.

Contact Us on 083 401 7383 / 076 615 4285